Standard Peripherals Library vs CMSIS vs HAL vs Low Level Library

Tags: ARM, C, Electronics, Embedded, Programming

The STM32 line of microcontrollers offer a bunch of features in a nice package at reasonable cost, something I like. What I don't like as much are the development libraries around it provided by ST. For this reason, most of the time I stick to writing code using the 'Cortex Microcontroller Software Interface Standard' (CMSIS) and the datasheet, and this works nicely but can be slow to develop. While it's still my personal favorite, I recently checked out the other options to see where things are going to do the prep work for some ports of older projects built using the 'Standard Peripherals Library' to newer processors such as the STM32L4.

 

Microcontroller

 

Anyone Can Code...

Tags: Other, Programming

Every time I hear the "everybody can/should/has to code" line...

Anyone Can Code

Flashing STM32L15X EEPROM with STLink under Linux

Tags: Embedded, Linux, Programming

For a while now I've been evaluating some 32-bit micro controllers for a future product. One of them was the STM32L15x series. There are some handy development boards available such as the Nucleo boards. Since we need to have the ability to program processors from Linux for our small production line, tool support is one of the checkboxes that need to be ticked.

For the STM32 series, flashing the microcontroller can be done through GDB, OpenOCD, and the STLink tool. One issue that arose however was the need to program the EEPROM available on the STM32L series. This requirement comes from need to generate and program different EEPROM content on a per board basis at the production line. Doing that requires a few tweaks that are documented below...

Solutions

 

On Processes and Threads

Tags: C, Computer Architecture, Linux, Programming

Some time ago I followed an interesting discussion on a board where people were discussing multi-core software development. During the course of the discussion it became apparent that there is a lot of confusion and misconceptions about a 'process' and a 'thread' as they exist on e.g., a Linux system. Both are applicable to make use of multi-core systems, but they do so in different ways. Even though the exact distinction while compared to early definitions of the terms has perhaps become somewhat blurred, the two remain separate entities which can complement each other perfectly. In this post I'm going to try and illustrate the similarities and differences, and show you some real life scenarios of both. Keep in mind that we will be making some generalizations - and there are lots of examples where these generalizations do not directly apply, or where there are other possible implementations of the cited examples. Going into these would turn this blog entry into an entire book...

Multiprocess

Web Proxy

Tags: Network, Security

We just launched a free web proxy service: https://www.unblock-everything.com/. Not only will it help you get around firewalls and sites blocked by your ISP, it does so without logging user data. Oh, and we're 'Not Subject to American Law' - in reference to the recent NSA surveillance debacle ;-)